Back to Products
Home/Products/Driver Solution/Triac/Phase-Cut Dimming LED Driver/trailing edge phase-cut LED dimmer Smart Switch Lighting Accessory Light Led Controller Dimmer 300W
trailing edge phase-cut LED dimmer Smart Switch Lighting Accessory Light Led Controller Dimmer 300W - Image 1
1 / 6

trailing edge phase-cut LED dimmer Smart Switch Lighting Accessory Light Led Controller Dimmer 300W

Product Introduction

It is a trailing edge phase-cut LED dimmer, suitable for dimmable LED lamps, HV halogen lamps, HV LED strips, dimmable electronic transformers, incandescent lamps, etc.; the dimming is smooth and noise-free, the dimming range is 0-100%, and the minimum brightness can be preset.

Product Downloads

Overview

1、Product parameters:

   Voltage:200-240Vac/50Hz    Weight:75g        

   Ta:0~-+40℃               Size:86×86×41mm        

EN60669-2-1              Wire:0.75-2.5mm²

2、Power range at 25°C ambient temperature:

    (1)Dimmable led: PF is the power factor of the      lamp

PF≥0.9  3-300W Max.

PF≤0.6  3-150W Max.

   (2)HV Halogen Lamp/HV LED Strip/Incandescent Lamp:<300W

   (3)Dimmable electronic transformers:10-300W

3、Minimum brightness preset:

Turn the lights down to the lowest setting, adjust the potentiometer for the

minimum brightness setting clockwise, the lowest brightness to brighten, and the counterclockwise to dim.

4、Built-in over-temperature protection

Disconnect the load when the temperature reaches 120°C

5、Warning:

(1) L in and l out shall not be short circuited;

(2) Cannot be used for speed control of fans

Interested in Our Products

If you are interested in our products and would like to receive further information, please fill out the form below to send us your request. or mail to info@tenclock.com directly.

Join Us

Be the first to get updates about products and services.

Customer Review

Please help us leave your value comments

TOP